Accessory
High Voltage Cooling Fan for Upgrade

Preview
This combo is specially designed for 1/10 and 1/12 scale ON-ROAD car.

Main applications:
1) R/C enthusiasts to upgrade to brushless and experience incredible power and starting torque, minimal maintenace and longer runtimes;
2)"RTR" (Ready To Run) applications for manufacturers;
3) Club race for stock equipments (Same controllers and/or same motors) ;

The Combo includes the following items:

ITEM NO.:Combo-b2
  35A-SL brushless ESC:  1pcs
  9T sensorless brushless motor: 1pcs
  Program card for car ESC: 1pcs
  Cooling fan: 1pcs

 1  Specification of The ESC

1.1 Output: 
  35A-SL: Continuous current 35A, burst current 190A.
  25A-SL-H: Continuous current 25A, burst current 90A.
1.2 Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.  Note1
1.3 BEC Output: 6V/1.5A.
1.4 Resistance:
  35A-SL: 0.0015 Ohm.
  25A-SL-H: 0.005 Ohm.
1.5 Motor Supported:  Sensorless Brushless motor.
1.6 Suitable Brushless Motor:Note2
  35A-SL:  >=9T (Size: 3650-M)
  25A-SL-H:  >=12T (Size: 3650-M)
1.7 Suitable Car:
  35A-SL:  1/10, 1/12 on-road car for sportful race.
  25A-SL-H: 1/12 on-road cars for sportful race.
1.8 Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
1.9 Weight: 30g(Without wires).

Note1:
 For 4-6 cells NiMH or 2S Lipo: You needn't change the cooling fan coming with the ESC;
 For 7-9 cells NiMH or 3S Lipo: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);

Note2: The values of  "T" number is tested under the following conditions: 
  a) The input is a 6 cells NiMH battery; 
  b) The ESC is equipped with a cooling fan.

3  Features
 
3.1 Compatible with all sonsorless brushless motor.
3.2 Use top quality electronic components to enhance the current endurance ability of the ESC.
3.3 Excellent start-up, acceleration and linearity features.
3.4 With 2 running modes (Racing mode and Forward/Backward mode).
3.5 With 4 steps of maximum reverse force adjustment.
3.6 Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
3.7 With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
3.8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
3.9 With 8 steps of timing adjustment to get the best compatibility with various of motors.
3.10 Easily program with only one button and compatible with pocket-sized program card.

3.11 Motor uses top quality materials:  
  Aluminium shell (case)
  High quality magnets
  Copper wires of high temperature endurance
  Good quality bearings.
3.12  Dustproof design for the motor