Accessory:
High Voltage Cooling Fan for Upgrade

Preview:
This combo is specially designed for 1/10 and 1/12 scale ON-ROAD and OFF-ROAD car.

Main applications:
1) R/C enthusiasts to upgrade to brushless and experience incredible power and starting torque, minimal maintenace and longer runtimes;
2) "RTR" (Ready To Run) applications for manufacturers;
3) Club race for stock equipments (Same controllers and/or same motors) ;

The Combo includes the following items:

ITEM NO.:combo-b4
60A-SL brushless ESC: 1pcs
5.5T sensorless brushless motor: 1pcs
Program card for car ESC: 1pcs
Cooling fan: 1pcs

ITEM NO.:combo-b5
60A-SL brushless ESC: 1pcs
8.5T sensorless brushless motor: 1pcs
Program card for car ESC: 1pcs
Cooling fan: 1pcs

Specification of The ESC
1.1 Output: Continuous current 60A, burst current 380A.
1.2 Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.Note1
1.3 BEC Output: 6V/1.5A.
1.4 Resistance: 0.0007 Ohm
1.5 Motor Supported: Sensorless Brushless motor.
1.6 Suitable Brushless Motor: Note2
60A-SL: >=5.5T (Size: 3650)
1.7 Suitable Car: 1/10, 1/12 on-road and off-road car for sportful race
1.8 Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
1.9 Weight: 32g(Without wires).

Note1:
For 4-6 cells NiMH or 2S Lipo: You need not change the cooling fan coming with the ESC;
For 7-9 cells NiMH or 3S Lipo: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);

Note2: The values of "T" number is tested under the following conditions:
a) The input is a 6 cells NiMH battery;
b) The ESC is equipped with a cooling fan.

3 Features

3.1 Compatible with all sonsorless brushless motor.
3.2 Use top quality electronic components to enhance the current endurance ability of the ESC.
3.3 Excellent start-up, acceleration and linearity features.
3.4 With 2 running modes (Racing mode and Forward/Backward mode).
3.5 With 4 steps of maximum reverse force adjustment.
3.6 Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
3.7 With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
3.8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
3.9 With 8 steps of timing adjustment to get the best compatibility with various of motors.
3.10 Easily program with only one button and compatible with pocket-sized program card.

3.11 Motor uses top quality materials:
Aluminium shell (case)
High quality magnets
Copper wires of high temperature endurance
Good quality bearings.
3.12 Dustproof design for the motor.